Standard truck package specifications
Tower winch block;
Permissible load on the hook, t; 80
- with the installation of wind braces; 80
- without installation of wind braces; -
Transport base; Self-propelled chassis SABR-23103-06; BAZ-69096; MZKT-7004; Semi-trailer SP-95183
Wheel formula; 12x12.1; 10x10.1; 3-axle 2-tire
Power drive unit and chassis; YaMZ-7511.10 400; YaMZ-7511; YaMZ-7511; YaMZ-7511
Engine power, hp; (E-0) 300; (E-0) 300; (E-0) 300; (E-0) 240
Truck mast with “tubing;Tilting open-face box-section mast
Machine mast with “anti-flight device”; Inclined, with an open front edge from a closed profile, material St. 09G2S
Number of section;32
Height from the ground to the axis of the crown block, m; 28
Hook lifting height, m;
Angle of inclination, degrees; 3°
Mast lifting; 2 hydraulic cylinders
Upper section extension;DN60, BRS-21/2” with phase separator and pressure-gauge
Manifold riser with gander;
Drilling line diameter, mm; 25
Riding worker's balcony; 3 balcony positions, sheltered balcony, 2.5 m high, with evacuation system
Balcony capacity for drill pipes Ø114 mm, linear m;2200
Drilling winch; Gear, single-shaft, single-drum, pneumocoupling. Switching speed from the driller's console. The strengthened angular reducer of a drive of the winch. Winch control - from the driller's station
Winch brake;Two-band, with a balancer, pads 230x120 mm, the main brake is manual, the auxiliary is foot.
Driller's station with driller's console; Located in the rear, left side of the unit at the height of the working
Shelter of the driller's post; Frame, awning
Floor heating of the driller's station; Electric explosion-proof heating element
Hydraulic system; Pumps type 310.4.112 - 2 units, axial piston for drive
mechanisms of the unit, hydraulic key, hydraulic rotor, 2 hydraulic fasteners.
An oil cooler can be installed upon agreement.
Pneumatic system; With air dryer, receiver volume - 100 l.
Working pressure, kg/cm2; up to 10
Additional equipment;Conclusion for airspider connection
Electrical equipment of the unit; In explosion-proof design
Unit lighting; LED lamps in explosion-proof design
Supply voltage, V; 24
Emergency drive to complete the trip and dismantle the unit; Electric motor 30 kW, 380 V, chain drive to the transmission. Emergency compressor S-412M.
External hydraulic station connection;3/4” nipple
Dimensions no more than, mm; 19000 x 2500 x 4500 (without balcony)
Mass of the unit no more, t; 55
Auxiliary winch;Hydraulic 3
Rope diameter, mm; 13
Controlled parameters; Weight of the string, torque of the hydraulic tong, torque and speed of the rotor, RJ pressure.
Load limiter; Electropneumatic, based on DEL-150 device
Hook block lifting height limiter; Electro-pneumatic, cable type
Unit leveling; 2 bubble-type inclinometers
Emergency stop of the engine; Air slide damper, control from the post
driller and remote control.
Hydraulic fasteners, 2 units; Stroke-1000 mm, force 5 t, location on the mast
Remote control for mast lifting, lifting of the upper section; Cable 45 m
Fixing support jacks;Mechanical locks
Mechanical rotor drive; Type R-80x400 or RUP-560. Drive reducer
rotor with reverse and pneumatic brake for spring removal. Rotor drive with cardan or chain drive. Transfer of rotation to the rotor table by a vertical cardan or chain reducer.
Hydraulic rotor drive; Type R-80x400 or RUP-560 with hydraulic drive.
Rotor drive from 2 axial piston pumps type 310.4.112. It is possible to install hydraulic oil cooling.
Rotary base;Telescope type. Dimensions: 6x2.5x5 m (up to the rotor table),
in working position. Manual hoist 5 t. Preventer maintenance platform. Fencing with shelter 2.5 m high with a "visor"
Candlestick; Telescope type. Dimensions: 6x2.5x5m (to the surface from
RUP-560 rotor with PKR-560 (or SPG-100 spider); Load capacity - 150 t, through hole
Ø560 mm, torque 20000 NM, revolutions 0-150 rpm, liners 89x89 mm
Drilling swivel VB-80; Load capacity - 80 tons, flow area 75 mm.
Lead pipe; VBT-80x80x11300
Drilling link (pair);ShBD-80x1500
Reception bridge; On a sleigh. Dimensions, mm: 14000x2300xx600, 6 racks
6 m long. Pipe chipper. Ladder gutter, width 1500 mm.
Ramp; Height 300 mm